Aruba AP-305 FIPS/TAA 2x2/3x3 11ac Access Point

Introduction

The Aruba 300 Series APs offer a choice of operating modes to meet your unique management and deployment requirements.
Controller-managed mode - When managed by Aruba Mobility Controllers, Aruba 300 Series APs offer centralized configuration, data encryption, policy enforcement and network services, as well as distributed and centralized traffic forwarding
Aruba Instant mode - In Aruba Instant mode, a single AP automatically distributes the network configuration to other Instant APs in the WLAN. Simply power-up one Instant AP, configure it over the air, and plug in the other APs - the entire process takes about five minutes. If WLAN requirements change, a built-in migration path allows 300 Series Instant APs to become part of a WLAN that is managed by a Mobility Controller
Remote AP (RAP) for branch deployments
Air monitor (AM) for wireless IDS, rogue detection and containment
Spectrum analyzer, dedicated or hybrid, for identifying sources of RF interference
Secure enterprise mesh
For large installations across multiple sites, the Aruba Activate service significantly reduces deployment time by automating device provisioning, firmware upgrades, and inventory management. With Aruba Activate, the Instant APs are factory-shipped to any site and configure themselves when powered up.

Features

2.4 GHz

Y

5 GHz

Y

Maximum data transfer rate

1600 Mbit/s

Maximum data transfer rate (2.4 GHz)

300 Mbit/s

Maximum data transfer rate (5 GHz)

1300 Mbit/s

Ethernet LAN data rates

10,100,1000 Mbit/s

Networking standards

IEEE 802.11ac,IEEE 802.11ad,IEEE 802.11b,IEEE 802.11g,IEEE 802.11n,IEEE 802.3af,IEEE 802.3at,IEEE 802.3az

Auto MDI/MDI-X

Y

MIMO

Y

MIMO type

Multi User MIMO

Spread spectrum method

DSSS,OFDM

Modulation

16-QAM,64-QAM,256-QAM,BPSK,CCK,QPSK

Quality of Service (QoS) support

Y

Security

Security algorithms

Not supported

Ports & interfaces

Ethernet LAN (RJ-45) ports

1

USB 2.0 ports quantity

1

USB connector type

USB Type-A

Power

Power over Ethernet (PoE)

Y

Power consumption (max)

13 W

Design

Placement

Ceiling, Wall

Product colour

White

Cable lock slot

Y

Cable lock slot type

Kensington

Antenna

Antenna type

Internal

Antenna direction type

Omni-directional

Antenna features

Integrated antenna

Antennas quantity

3

Antenna gain level (max)

5.4 dBi

Operational conditions

Operating relative humidity (H-H)

5 - 93%

Operating temperature (T-T)

0 - 50 °C

Storage temperature (T-T)

-40 - 70 °C

Weight & dimensions

Width

165 mm

Depth

165 mm

Height

38 mm

Weight

460 g