70m CAT6 Hdmi 4k60 Hdbaset Uk Wall Plate Extender

Introduction

The Lindy Cat.6 HDBaseT HDMI 4K60 Wall Plate Transmitter is one part of a high performance, reliable solution for extending HDMI signals over long distances via Cat.6 network cable.

By combining this Transmitter unit with a compatible HDBaseT Receiver such as Lindy No. 38214 and 38342, this solution ensures reliable transmission up to 70m.

The following distance and resolution combinations are possible when using high quality Cat.6 or above U/UTP or F/UTP cable:

70m: 1920x1080@60Hz 4:4:4 8bit
40m: 3840x2160@60Hz 4:4:4 8bit / 4:2:2 12bit

Supporting resolutions up to 4K Ultra HD, video can be viewed in stunning clarity, while additional support for HDR (High Dynamic Range) allows content to be displayed with enhanced brightness, greater contrasts of blacks and whites and a much wider colour gamut. This provides a reliable solution for creating eye-catching digital signage in retail, immersive displays at events or engaging setups in larger conference rooms or lectures halls.

PoC (Power over Cable) functionality with On/Off switch provides additional flexibility. This allows power to be supplied alongside data through Cat.6 network cable in a point to point connection between the transmitter and receiver, meaning only a single power supply is required at one side of the installation.

Featuring bi-directional IR ports at both sides of the setup, the source equipment can be easily controlled from the display side, and the display can also be controlled from the HDMI source side. This extension system allows for complete and simple control for the user providing also RS-232 port via terminal block on the rear side of the wall plate.

HDBaset is a globally recognised standard for high quality distribution of AV content and other technologies, including power and control, over longer distances via low cost Cat.6 or above cable.

HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.

Please Note: the quoted lengths and resolutions are possible with a direct connection between Transmitter and Receiver using good quality Cat.6 or above cable. Using a different cable type, introducing couplers or patch panels may result in a reduction of possible distances.

Design

Product colour

HDMI Transmitter Multi-country Power Supply (UK, EU, US & AUS) IR Emitter Cable, 1.5m IR Receiver Cable, 1.5m 3-Pin Terminal Block 2-Pin Terminal Block Lindy Manual

Features

Type

AV transmitter

Maximum resolution

3840 x 2160 pixels

Cable types supported

Cat6

Maximum transfer distance

70 m

Chipset

VS010

Maximum refresh rate

60 Hz

Extended display identification data (EDID)

Yes

RS-232 pass-through

Yes

Bidirectional

Yes

Infrared (IR) frequency range

20 - 60 kHz

Bandwidth

18 Gbit/s

On/off switch

Yes

HDCP

Yes

Material

Metal

Wall mountable

Yes

HDCP version

2.2

Product colour

Black, White

Certification

California Proposition 65

Ports & interfaces

Connectivity technology

Wired

RJ-45 output ports

1

HDBaseT port

Yes

HDMI in

1

HDMI version

2.0

RS-232 output ports

1

3.5 mm (1/8-inch) in

Yes

3.5 mm (1/8-inch) out

Yes

Power

Power source type

DC

Operating voltage (transmitter)

24 V

Output current

1 A

Power requirements

24VDC 1A

Operational conditions

Operating temperature (T-T)

0 - 40 °C

Storage temperature (T-T)

-20 - 60 °C

Operating relative humidity (H-H)

20 - 90%

Weight & dimensions

Width

86 mm

Depth

38 mm

Height

86 mm

Weight

390 g

Packaging data

Quantity per pack

1 pc(s)

Package width

152 mm

Package depth

95 mm

Package height

133 mm

Package weight

540 g

Package type

Box

Packaging content

Manual

Yes

Technical details

Special features

Bi-directional IR, PoC

Sustainability compliance

Yes

Sustainability certificates

CE, Federal Communications Commission (FCC), RoHS, UKCA

Warranty period

2 year(s)