Web Managed Switch 10gbe And 2.5gbe Layer 2 For SMB Network Deployment

Introduction

The QSW-M2106R-2S2T is a Layer 2 Web Managed Switch with two 10GbE SFP+ fiber ports, two 10GbE RJ45 ports and six 2.5GbE RJ45 ports. Supporting Layer 2 switching and network management via a user-friendly web user interface, the QSW-M2106R-2S2T offers flexible deployment in hybrid high-speed network environments and provides an entry-level network management solution. With a half-width design, two QSW-M2106R-2S2T can be installed in a 1U rack space for space-saving.

10GbE connectivity
Includes two 10GbE SFP+ fiber ports (Backward compatible with 1G SFP) and two 10GbE RJ45 ports, compatible with NBASE-T technologies to support five speeds (10G / 5G / 2.5G / 1G / 100M) for high-speed networks.

2.5GbE connectivity
Six 2.5GbE RJ45 ports allow you to immediately multiply your network speed by 2.5 times while using existing Cat 5e cables.

User-friendly management interface
The QNAP Switch System (QSS) is easy to use and provides an overview dashboard, port management and setting guide, making central network management intuitive.

Layer 2 network
Provides Layer 2 management features (such as LACP, VLAN, ACL and LLDP) for IT staff to efficiently control network bandwidth and enhance security.

RSTP
One of the few web-managed switches that supports Rapid Spanning Tree Protocol (RSTP). Easily and efficiently deploy small/medium-scale networks that support expansion, redundancy, and loop prevention.

Online firmware update
QSS can be updated with just one click, helping IT staff ensure their network security.

Half-width design, two models in 1U
With a half-width rackmount design, a QSW-M2106R-2S2T can be installed in a 1U rack space with another half-width rackmount switch (such as QSW-M2108R-2C) for efficient physical space utilization and tidy cabling.

Flexible deployment with multiple 10G SFP+ fiber and Gigabit ports
The QSW-M2106R-2S2T provides two 10GbE SFP+ ports, two 10GbE RJ45 ports and six 2.5 Gigabit ports for connecting various devices and enabling hybrid high-speed networks. With SFP+ interfaces, Direct Attach Copper (DAC) cables can be used for connecting directly to SFP+ devices. You can also use RJ45 ports to connect 10GBASE-T/NBASE-T™ devices through RJ45 Category 6a (or better) cabling. The switching capacity of the QSW-M2106R-2S2T is 110Gbps, guaranteeing the full potential of each port.

Management features

Switch type

Managed

Switch layer

L2

Ports & interfaces

Basic switching RJ-45 Ethernet ports quantity

2

Basic switching RJ-45 Ethernet ports type

10G Ethernet (100/1000/10000)

2.5G Ethernet (copper) ports quantity

6

Installed SFP+ modules quantity

2

Console port

RJ-45

Network

Networking standards

IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1ad, IEEE 802.1p, IEEE 802.1w, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ae, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z

Data transmission

Switching capacity

110 Gbit/s

Throughput

55 Gbit/s

MAC address table

16000 entries

Design

Rack mounting

Y

Stackable

Y

Form factor

1U

Product colour

Black

Reset button

Y

LED indicators

Activity, Link, Power, Speed, Status

Number of fans

2 fan(s)

Electromagnetic compatibility

CLASS B

Power

Power source

AC

Power supply included

Y

AC input voltage

100 - 240 V

AC input frequency

50/60 Hz

Power consumption (typical)

40 W

Power over Ethernet (PoE)

Power over Ethernet (PoE)

N

Operational conditions

Operating temperature (T-T)

0 - 40 °C

Operating relative humidity (H-H)

5 - 95%

Weight & dimensions

Width

207 mm

Depth

248.8 mm

Height

43.3 mm

Weight

1.53 kg

Sustainability

Sustainability compliance

Y

Sustainability certificates

CE, Federal Communications Commission (FCC)

Packaging data

Package weight

2.3 kg