Introduction
The EdgeSwitch Fiber is a fully managed, Gigabit fiber switch, delivering robust performance and intelligent switching for highbandwidth networks. The EdgeSwitch Fiber offers an extensive suite of advanced Layer 2 switching features and protocols, and also provides Layer 3 routing capability.
Ubiquiti EdgeSwitch 12 Fiber Key Features
- Non-Blocking Throughput Switching
- High Performance and Low Latency
- Gigabit Ethernet SFP and RJ45 Ports
The EdgeSwitch Fiber offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss. For its total, non-blocking throughput, the EdgeSwitch Fiber supports up to 16 Gbps.
The EdgeSwitch Fiber offers high performance and low latency as an aggregation switch. For fiber connectivity, it features 12 SFP ports, eight of which also support 100 Mbps. For copper connectivity, the EdgeSwitch Fiber offers four Gigabit RJ45 ports.
Specifications
- Dimensions 443 x 221 x 43 mm (17.44 x 8.70 x 1.69")
- Weight - Rack-Mount Brackets Included 2.68 kg (5.91 lb) Rack-Mount Brackets Excluded2.59 kg (5.71 lb)
- Enclosure Characteristics SGCC Steel
- Total Non-Blocking Throughput 16 Gbps
- Switching Capacity 32 Gbps
- Forwarding Rate 23.81
- Mpps Max. AC Power Consumption 56W
- Power Method AC DC 100-240VAC/50-60 Hz, Universal Input DC 56W, 25 to 16V, with 2.5 mm DC Power Inline Connector
- Supported Voltage Range 100 to 240VAC 25 to 16VDC
- Power Supply AC/DC, Internal, 56W DC
- LEDs Per Data Port Speed/Link/Activity
- Networking Interfaces (8) 100/1000 Mbps SFP Ethernet Ports (4) 1000 Mbps SFP Ethernet Ports (4) 10/100/1000 Mbps RJ45 Ethernet Ports
- Management Interface (1) RJ45 Serial Port, Ethernet In/Out Band
- Certifications CE, FCC, IC
- Rackmount Yes, 1U High
- ESD/EMP Protection Air: ± 24 kV, Contact: ± 24 kV
- Operating Temperature -5 to 40° C (23 to 104° F)
- Operating Humidity 5 to 95% Noncondensing
- Shock and Vibration ETSI300-019-1.4 Standard
Software Information - Core Switching Features
- ANSI/TIA-1057: LLDP-Media Endpoint Discovery (MED)
- IEEE 802.1AB: Link Layer Discovery Protocol (LLDP)
- IEEE 802.1D: Spanning Tree Compatibility
- IEEE 802.1S: Multiple Spanning Tree Compatibility
- IEEE 802.1W: Rapid Spanning Tree Compatibility
- IEEE 802.1Q: Virtual LANs with Port-Based VLANs
- IEEE 802.1p: Ethernet Priority with User Provisioning and Mapping
- IEEE 802.1X: Port-Based Authentication with Guest VLAN Support
- IEEE 802.3: 10BASE-T IEEE 802.3u: 100BASE-T
- IEEE 802.3ab: 1000BASE-T
- IEEE 802.1ak: Virtual Bridged Local Area Networks - Amendment 07: Multiple Registration Protocol
- IEEE 802.3ac: VLAN Tagging
- IEEE 802.3ad: Link Aggregation
- IEEE 802.3x: Flow Control
- IEEE 802.1D-2004: Generic Attribute Registration Protocol: Clause 12 (GARP)
- IEEE 802.1D-2004: Dynamic L2 multicast registration: Clause 10 (GMRP)
- IEEE 802.1Q-2003: Dynamic VLAN registration: Clause 11.2 (GVRP)
- RFC 4541: Considerations for Internet Group Management Protocol (IGMP) Snooping Switches
- RFC 5171: Unidirectional Link Detection (UDLD) Protocol
Advanced Layer 2 Features
- Broadcast Storm Recovery
- Broadcast/Multicast/Unknown Unicast Storm Recovery
- DHCP Snooping IGMP Snooping Querier
- Independent VLAN Learning (IVL) Support
- Jumbo Ethernet Frame Support
- Port MAC Locking
- Port Mirroring
- Protected Ports
- Static MAC Filtering
- TACACS+
- Voice VLANs
- Unauthenticated VLAN
- Internal 802.1X Authentication Server
To see the complete specification, please see the datasheet in the top, right hand corner of this page.
