Introduction
The Ubiquiti PowerBeam AC - PBE-5AC-400-ISO is a 5 GHz airMAX ac Bridge that is ideal for deployments requiring maximum performance and RF isolation.
Ubiquiti PowerBeam PBE-5AC-400-ISO Key Features
- Frequency - 5 GHz
- Throughput 450+ Mbps
- Range 25+ km
- Gain - 25dBi
- Dish Reflector - 400mm
Superior RF Isolation
The Ubiquiti PowerBeam PBE-5AC-400-ISO directs RF energy in a tighter beamwidth, and its integrated isolator design improves RF isolation to spatially filter out interference. Compare the two near-field plots, and note the superior performance of the integrated RF isolator. Both near-field plots are displayed in watts and use a linear scale.
Specifications
General
- Processor Specs - Atheros MIPS 74Kc, 560 MHz
- Memory - 64 MB DDR2, 16 MB Flash
- Networking Interface - (1) 10/100/1000 Ethernet Port
- Wireless Approvals - FCC, IC, CE
- RoHS Compliance
- Dimensions - 459 x 459 x 261 mm (18.07 x 18.07 x 10.28")
- Weight - 3.22 kg (7.10 lb)
- Power Supply - 24V, 0.5A Gigabit PoE
- Power Method - Passive PoE (Pairs 4, 5+; 7, 8 Return)
- Supported Voltage Range - 20-26VDC
- Max. Power Consumption - 8.5W
- Gain - 25 dBi
- Operating Frequency
- Worldwide 5170 - 5875 MHz
- USA 5725 - 5850 MHz
- Wind Loading - 390 N @ 200 km/h (88 lbf @ 125 mph)
- Wind Survivability - 200 km/h (125 mph)
- LEDs - (1) Power, (1) LAN, (4) WLAN
- Signal Strength LEDs - Software-Adjustable to Correspond to Custom RSSI Levels
- Channel Sizes
- PtP Mode 10/20/30/40/50/60/80 MHz
- PtMP Mode 10/20/30/40 MHz
- Polarisation - Dual Linear
- Enclosure - Outdoor UV Stabilised Plastic
- Mounting - Pole-Mount Kit Included
- ESD/EMP Protection - Air: ± 24 kV, Contact: ± 24 kV
- Operating Temperature - -40 to 70° C (-40 to 158° F)
- Operating Humidity - 5 to 95% Noncondensing
- Salt Fog Test - IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5
- Vibration Test - IEC 68-2-6
- Temperature Shock Test - IEC 68-2-14
- UV Test - IEC 68-2-5 at 40° C (104° F), Equivalent: ETS 300 019-1-4
- Wind-Driven Rain Test - ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5
