Introduction
The Ubiquiti PowerBeam AC PBE-5AC-620 focuses in one direction, blocking or spatially filtering out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.
PowerBeam AC PBE-5AC-620 Key Features
- Frequency: 5 GHz
- Throughput: 450+ Mbps
- Range: 30+ km
- Uniform Beamwidth Maximises Noise Immunity
- Innovative Mechanical Design
- High-Speed Processor for Superior Performance
Incorporating a dish reflector design with proprietary airMAX ac technology, the PowerBeam AC PBE-5AC-620 is ideal for CPE deployments requiring maximum performance as it directs RF energy through a tighter beamwidth.
InnerFeed Technology
Ubiquitis InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. This feature, coupled with its high-performance and innovative mechanical design, makes the PowerBeam AC PBE-5AC-620 versatile and cost-effective to deploy.
Specifications
System and Regulatory/Compliance
- Processor Specs Atheros MIPS 74Kc, 720 MHz
- Memory 128 MB DDR2, 8 MB Flash
- Networking Interface (1) 10/100/1000 Ethernet Port
- Wireless Approvals FCC, IC, CE
- RoHS Compliance Yes
Physical/Electrical/Environmental
- Dimensions: 620 x 620 x 386 mm (24.41 x 24.41 x 15.2")
- Weight: 6.4 kg (14.11 lb)
- Power Supply: 24V, 0.5A Gigabit PoE
- Power Method: Passive PoE (Pairs 4, 5+; 7, 8 Return)
- Max. Power Consumption: 8.5W
- Gain: 29 dBi
- Operating Frequency: Worldwide (5150 - 5875 MHz), USA (5725 - 5850 MHz)
- Wind Loading: 872 N @200 km/h (196 lbf @125 mph)
- Wind Survivability: 200 km/h (125 mph)
- LEDs: (1) Power, (1) LAN, (4) WLAN
- Signal Strength: LEDs Software-Adjustable to Correspond to Custom RSSI Levels
- Channel sizes: PtP Mode (10/20/30/40/50/60/80 MHz, PtMP Mode (10/20/30/40 MHz)
- Polarisation: Dual Linear
- Enclosure: Outdoor UV Stabilised Plastic
- Mounting: Pole-Mount Kit Included
- ESD/EMP Protection: Air: ± 24 kV, Contact: ± 24 kV
- Operating Temperature: -40 to 70° C (-40 to 158° F)
- Operating Humidity: 5 to 95% Non-Condensing
- Salt Fog Test: IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5
- Vibration Test: IEC 68-2-6
- Temperature Shock Test: IEC 68-2-14
- UV Test: IEC 68-2-5 at 40° C (104° F), Equivalent: ETS 300 019-1-4
- Wind-Driven Rain Test: ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5
